***********************************
Install Guide
***********************************

Setting up and running `cobblerd` is not a easy task. Knowledge in apache configuration (setting up ssl, virtual hosts,
apache module and wsgi) is needed. Certificates and some server administration knowledge is required too.

Cobbler is available for installation in several different ways, through packaging systems for each distribution or
directly from source.

Cobbler has both definite and optional prerequisites, based on the features you'd like to use. This section documents
the definite prerequisites for both a basic installation and when building/installing from source.


Prerequisites
#############

Packages
========

Please note that installing any of the packages here via a package manager (such as dnf/yum or apt) can and will require
a large number of ancilary packages, which we do not document here. The package definition should automatically pull
these packages in and install them along with Cobbler, however it is always best to verify these requirements have been
met prior to installing Cobbler or any of its components.

First and foremost, Cobbler requires Python. Since 3.0.0 you will need Python 3. Cobbler also requires the installation
of the following packages:

- createrepo_c
- httpd / apache2
- xorriso
- mod_wsgi / libapache2-mod-wsgi
- mod_ssl / libapache2-mod-ssl
- python-cheetah
- python-netaddr
- python-simplejson
- python-librepo
- PyYAML / python-yaml
- rsync
- syslinux
- tftp-server / atftpd
- dnf-plugins-core

If you decide to use the LDAP authentication, please also install manually in any case:

- python3-ldap3 (or via PyPi: ldap3)

Cobbler-web only has one other requirement besides Cobbler itself:

- Django / python-django

Koan can be installed apart from Cobbler, and has only the following requirement (besides python itself of course):

- python-simplejson

.. note::
   Not installing all required dependencies will lead to stacktraces in your Cobbler installation.

Source
======

.. note::
   Please be aware that on some distributions the python packages are named differently. On Debian based systems
   everything which is named ``something-devel`` is named ``something-dev`` there. Also please remember that the case of
   some packages is slightly different.

.. warning::
   Some distributions still have Python 2 available. It is your responsibility to adjust the package names to Python3.

Installation from source requires the following additional software:

- git
- make
- python3-devel (on Debian based distributions ``python3-dev``)
- python3-Cheetah3
- python3-future
- python3-Sphinx
- python3-coverage
- openssl
- apache2-devel (and thus apache2)
- A TFTP server


Installation
############

Cobbler is available for installation for many Linux variants through their native packaging systems. However, the
Cobbler project also provides packages for all supported distributions which is the preferred method of installation.

Packages
========

We leave packaging to downstream; this means you have to check the repositories provided by your distribution vendor.
However we provide docker files for

- CentOS 7
- CentOS 8
- Debian 10 Buster

which will give you packages which will work better then building from source yourself.

Packages from source
====================

For some platforms it's also possible to build packages directly from the source tree.

RPM
###

.. code-block:: shell

    $ make rpms
    ... (lots of output) ...
    Wrote: /path/to/cobbler/rpm-build/cobbler-3.0.0-1.fc20.src.rpm
    Wrote: /path/to/cobbler/rpm-build/cobbler-3.0.0-1.fc20.noarch.rpm
    Wrote: /path/to/cobbler/rpm-build/koan-3.0.0-1.fc20.noarch.rpm
    Wrote: /path/to/cobbler/rpm-build/cobbler-web-3.0.0-1.fc20.noarch.rpm

As you can see, an RPM is output for each component of Cobbler, as well as a source RPM. This command was run on a
system running Fedora 20, hence the fc20 in the RPM name - this will be different based on the distribution you're
running.

DEB
###

To install Cobbler from source on a Debian-Based system, the following steps need to be made (tested on Debian Buster):

.. code-block:: shell

    $ apt-get -y install make git
    $ apt-get -y install python3-yaml python3-cheetah python3-netaddr python3-simplejson
    $ apt-get -y install python3-future python3-distro python3-setuptools python3-sphinx python3-coverage
    $ apt-get -y install pyflakes3 python3-pycodestyle
    $ apt-get -y install apache2 libapache2-mod-wsgi-py3
    $ apt-get -y install atftpd
    # In case you want cobbler-web
    $ apt-get -y install python3-django

    $ a2enmod proxy
    $ a2enmod proxy_http
    $ a2enmod rewrite

    $ ln -s /srv/tftp /var/lib/tftpboot

    $ systemctl restart apache2

Change all ``/var/www/cobbler`` in ``/etc/apache2/conf.d/cobbler.conf`` to ``/usr/share/cobbler/webroot/``
Init script:
- add Required-Stop line
- path needs to be ``/usr/local/...`` or fix the install location


Source
######

The latest source code is available through git:

.. code-block:: shell

    $ git clone https://github.com/cobbler/cobbler.git
    $ cd cobbler

The release30 branch corresponds to the official release version for the 3.0.x series. The master branch is the
development series, and always uses an odd number for the minor version (for example, 3.1.0).

When building from source, make sure you have the correct prerequisites. The Makefile uses a script called
`distro_build_configs.sh` which sets the correct environment variables. Be sure to source it if you do not
use the Makefile.
If all prerequisites are met, you can install Cobbler with the following command:

.. code-block:: shell

    $ make install

This command will rewrite all configuration files on your system if you have an existing installation of Cobbler
(whether it was installed via packages or from an older source tree).

To preserve your existing configuration files, snippets and automatic installation files, run this command:

.. code-block:: shell

    $ make devinstall

To install the Cobbler web GUI, use these steps:

#. Copy the systemd service file for `cobblerd` from ``/etc/cobbler/cobblerd.service`` to your systemd unit directory
   (``/etc/systemd/system``) and adjust ``ExecStart`` from ``/usr/bin/cobblerd`` to ``/usr/local/bin/cobblerd``.
#. Install ``apache2-mod_wsgi-python3`` or the package responsible for your distro. (On Debian:
   ``libapache2-mod-wsgi-py3``)
#. Enable the proxy module of Apache2 (``a2enmod proxy`` or something similar) if not enabled.
#. ``make webtest``
#. Copy ``templates`` and ``cobbler.wsgi`` from the ``web`` folder to ``/usr/share/cobbler/web``.
#. Copy  ``settings.py`` from ``cobbler/web`` to ``/usr/share/cobbler/web`` and adjust the ``SECRET_KEY`` there.
#. Restart Apache and ``cobblerd``.

This will do a full install, not just the web GUI. ``make webtest`` is a wrapper around ``make devinstall``, so your
configuration files will also be saved when running this command. Be adviced that we don't copy the service file into
the correct directory and that the path to the binary may be wrong depending on the location of the binary on your
system. Do this manually and then you should be good to go. The same is valid for the Apache webserver config.

.. _relocating-your-installation:

Relocating your installation
############################

Often folks don't have a very large ``/var`` partition, which is what Cobbler uses by default for mirroring install
trees and the like.

You'll notice you can reconfigure the webdir location just by going into ``/etc/cobbler/settings.yaml``, but it's not
the best way to do things -- especially as the packaging process does include some files and directories in the stock
path. This means that, for upgrades and the like, you'll be breaking things somewhat. Rather than attempting to
reconfigure Cobbler, your Apache configuration, your file permissions, and your SELinux rules, the recommended course of
action is very simple.

1. Copy everything you have already in ``/var/www/cobbler`` to another location -- for instance, ``/opt/cobbler_data``
2. Now just create a symlink or bind mount at ``/var/www/cobbler`` that points to ``/opt/cobbler_data``.

Done. You're up and running.

If you decided to access Cobbler's data store over NFS (not recommended) you really want to mount NFS on
``/var/www/cobbler`` with SELinux context passed in as a parameter to mount versus the symlink. You may also have to
deal with problems related to rootsquash. However if you are making a mirror of a Cobbler server for a multi-site setup,
mounting read only is OK there.

Also Note: ``/var/lib/cobbler`` can not live on NFS, as this interferes with locking ("flock") Cobbler does around it's
storage files.